SY-P031HD Medical endoscope camera ENT Endoscope Camera for android
1. In the use of the product, you must be strict compliance with the electrical safety regulations of
the nation and region.
2. Please make sure that the plug is firmly connected on the power socket.
3. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
4. Do not touch CMOS modules with fingers. If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently. If the camera will not be used for an extended period, please turn on
the lens cap to protect the CMOS from dirt.
5. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of CMOS at the
same time.
6. The CMOS may be burned out by a laser beam, so when any laser equipment is on using,
make sure that the surface of CMOS will not be exposed to the laser beam.
7. Do not place the camera in extremely hot, cold(the operating temperature shall be-10ºC~+
60ºC ), dusty or damp locations, and do not expose it to high electromagnetism radiation.
8. Keep the camera away from wet environment while not using.
the nation and region.
2. Please make sure that the plug is firmly connected on the power socket.
3. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
4. Do not touch CMOS modules with fingers. If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently. If the camera will not be used for an extended period, please turn on
the lens cap to protect the CMOS from dirt.
5. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of CMOS at the
same time.
6. The CMOS may be burned out by a laser beam, so when any laser equipment is on using,
make sure that the surface of CMOS will not be exposed to the laser beam.
7. Do not place the camera in extremely hot, cold(the operating temperature shall be-10ºC~+
60ºC ), dusty or damp locations, and do not expose it to high electromagnetism radiation.
8. Keep the camera away from wet environment while not using.
Camera Data | 1 | Sensor | 1/2.8" Sony CMOS |
2 | Pixels | 2.100.000 Pixels | |
3 | Output Resolution | 1920*1080/30FPS | |
4 | White Balance | Auto(lock) | |
5 | Image Fressze | Yes | |
6 | Mode Switch | Yes | |
7 | SNR | >50dB | |
8 | Scanning Mode | Progressive Scanning | |
9 | Vertical Resolution | 1200TVL | |
10 | Digital Noise Reduction | Auto | |
11 | Back Light Compensation | Auto | |
12 | Lens | F22mm | |
13 | Cable Length | 2.4 meters | |
14 | Dimension | 106mm(L)*36mm(D) | |
15 | Net weight | 154g | |
HDMI Data | 16 | Output Interface | HDMI 1.4(DVI) |
17 | Output Resolution | 1920*1080/60FPS | |
18 | Power Supply | DC5V | |
19 | Dimension | 78mm*32mm*18mm | |
20 | Net weight | 45g | |
USB Data | 21 | Output Interface | USB2.0 |
22 | Output Resolution | 1920*1080/30FPS | |
23 | Power Supply | No | |
24 | Driver | No | |
25 | Computer System | Widows/Mac OS/Linux | |
26 | Mobile Phone System | Android 7.0 or later | |
27 | Dimension | 60mm(L)*15mm(D) | |
28 | Net weight | 13g |