| Parameters | Specification | |
| Enter the indicator | Rated input voltage | 220V±25% |
| Maximum current | 2A | |
| Voltage range | 165~275V | |
| Frequency | 47~63Hz | |
| Start the rush current | <50A@220VAC Cold time | |
| Output indicator | Output power | 300W |
| Output voltage / current | +5V=30A,+3.3V=25A,+12V=18A | |
| Stable of output voltage | ±1%(Load range: 10%~100%) | |
| Ripple | ≤20mV(0~20MHz) | |
| Noise | ≤50mV(0~20MHz) | |
| Voltage Regulation | ≤±1% | |
| Load Regulation | ≤±4% | |
| Insulation | Input - Case Insulation Voltage | >2500VAC@<10mA/1min |
| Input - output insulation resistance | >50MΩ@500VDC | |
| Protection | Over current / over voltage protection | Yes |
| Surge protection circuit to adapt | 20 KV single surge voltage test as defined by IEC 61000-4-5 | |
| Surge protection circuit resistance to impact current | 10KA | |
| Environmental conditions | Operating temperature | -5ºC~+55ºC |
| Storage temperature | -20ºC~+65ºC | |
| Relative humidity | Max 95% non-condensing | |
| others | Effectiveness | 75% |
| Cooling method | Air-cooled | |
| Dimensions | 298mm(L)×55mm(W)×56mm(H) | |
| Weight | 2.8Kg | |
- WS-OTP2000L optical fiber communication system optical transmission platform is specially designed to meet the requirements of the metropolitan area front-end equipment room intensive installation and development of CATV optical fiber transmission receive, send an integrated communication platform.
- The platform is easy to install and flexible in configuration. The intelligent centralized monitoring unit can monitor the operating parameters of each module in the rack in real time. The Chinese display is easy and quick to operate.
- Intelligent state of the centralized monitoring system and ESC function, in the front panel to achieve the level, the slope of the individual adjustments.
- Dedicated dual-power server hot backup architecture, with the microcomputer-controlled intelligent temperature control system, effectively improving the reliability of the system.
- The optical transmission platform of WS-OTP2000L optical fiber communication system optical transmission platform is also equipped with standard RJ45 network management communication interface (built-in transponder), 10 / 100Mbps adaptive rate, which can conveniently realize the centralized monitoring of remote network management. It is a high performance bidirectional HFC metro area Broadband network of choice products.
- Can be equipped with single or dual power supply.
- Can be equipped with 17 modular supporting devices can be inserted to form a complete head (including optical amplifiers, amplifiers, switches, transmit and receive devices, etc.).
